Bar Types

Snap Lock Bar

This is a complex pair of aluminium extrusions which work together to form a jaw that holds media in place tightly, but may also be opened and re-used.

It is best used for displays which do not need to be joined but most of the clips and connectors also fit the snap lock bar as it has the same rear profile as the classic bar.It enables:

  • Size variations from 40cm to 205cm in one section.
  • Graphics to be applied easily and also changed easily.
  • Frame less or framed graphics.

Classic Bar

This is a simple aluminium extrusion with a profile which fits into all of the clip and connector types. Using self adhesive Hook & Loop, this bar becomes a very versatile way of applying graphics to the system.It enables:

  • Size variations from 40cm to 205cm in one section.
  • Graphics to be applied easily and also changed easily.
  • Bars to be joined with widescreen joint for very wide displays.
  • Double sided tape to be applied for different media types.

Channel Bar

This rail is similar to the classic rail but it has a channel all the way through on one side.This provides a slot into which we can slide graphics which have a rod or flexible wire sewn into them which is slightly larger than the channel dimensions.It enables:

The rail to be used horizontally as well as vertically and we employ this on the FLEX-frame system.

Graphics to be applied easily and also changed easily – simply slide in or out.

Perfect weight for the bottom of suspended graphics as the bottom rail will sit horizontally rather than to one side of the graphic.

Snap Lock Bar Open

 

Snap Lock Bar Closed

 

Classic Bar

 

Fabric Attached To Bar

 

Channel Bar With Fabric Being Attached