Adaptability

Adaptability Toyota Banner

So many applications aside from the standard products

As the FLEX-display system comprises a series of components, all designed to work together in many configurations, this naturally leads to uses for the system which fall outside of the norm.  Essentially, it may be considered like a lightweight construction kit.

Additionally, we are able to make alterations to standard pole and rail sizes to suit those special applications.

As you can see above, a display was created using standard FLEX-display components and fabric graphics to create an over-car display.

There are also many ways in which even the standard products may be configured as shown in the top images on the right.  With our backdrops range, as we need to keep the displays portable, flexible joints are used to allow the rails to fold away.

This in turn leads to a very useful function which allows you to use that flexibility in order to use your display in different ways, perhaps depending on the space available at different events.

You can see how a wide display may be used straight or angled in various ways depending on the positioning of the joints.  Backdrops with special flexibility can be custom made so that you decide where the joins need to be.

You can also see how FLEX-display has been used to create bespoke point of sale (POS) displays by taking standard components and modifying them – only slightly in some cases.

For example, base plates can be made to have more vertical poles than standard and in different positions.  By then using vertical poles, we can attach acrylic shelves to the top of the poles or other types of fixtures and fittings.  As there are many components at our disposal, the flexibility of applications is significant.

So if you have an application which sits outside of what you may consider we can offer, please talk to us and we can see if we can suggest a solution using the FLEX-display components, often in combination with printed fabrics.

4.5m x 2m Backdrop Using The Flexible Joints To Make Various Configurations

Flex Display Banner Adaptability

POS Unit Made With Modified FLEX-display Components

Flex Display POS Unit

POS Unit Part Made With FLEX-display Components

Flex Display POS Unit

6m x 2m

4.5M Backdrop Banner


Lightweight, portable fabric backdrop

 
Features At A Glance

  • Huge impacting graphics
  • Lightweight and portable
  • Seamless printing options

FLEX-display 6m x 2m fabric backdrop

These displays are still lightweight and make an ideal portable backdrop for any situation.  They are often used for showrooms, events or as an exhibition stand back wall.

This really is a giant display and when you consider it can be carried by one person and assembled in a few minutes, it is mightily impressive.

600cm wide displays are made by using four Twinbase XLs to support one very wide graphic.  The fabric graphic is not in sections, it is printed in one piece and therefore produces totally seamless 12m square of print.

This display has two flexible joints which allow the display to be used straight or angled as you wish.  It helps too when folding the display away for transportation and storage.  In this case, the graphic is folded in a Z-shape down to 1.5m before rolling away.

Weight And Portability

The FLEX-display Backdrop 600 system is surprisingly lightweight considering the display area it creates.

With a one-piece graphic (so no fiddly joins) supported by 4 sets of our aluminium Twinbase XL modules, the whole system weighs in at approximately 14kgs including carry cases.

The complete display system fits neatly into two carry cases measuring 208cm in length by approx 10cm diameter and one measuring 135cm in length of the same style and diameter.

Flexibility

As with all the backdrops and banner stands in the FLEX-display range, the graphic is independent of the vertical poles and bases and so it is easy to change if required.

The system can also be made double sided too but only if straight (not angled) by using a different clip set and adding a second fabric graphic with rails to the rear of the display.

As we are using 4 x Twinbase XL modules with this display, it is easy to use them independently by just having smaller graphics with rails to create to separate banner stands.  So you could create 4 off 1.5m x 2m banners or 2 off 3m x 2m displays (and other combinations and sizes) using the same hardware for total flexibility.

Assembly

Although this stand is very large, assembly is still very straight forward but requires 3 people to connect the graphic ideally – just simply because the graphic is huge.

The display comprises bases, poles, clip set and fabric graphic.

Like all of our displays, the components are modular and designed for easy push fit assembly.  Building this stand hardware is just as easy as building up one of our smaller displays as it works in the same way.

Flex Display Backdrop 6006M Banner Backdrop

6M Banner Backdrop 2

6M Banner Backdrop 3


4.5m x 2m

4.5M Backdrop Banner


4.5m x 2m Portable fabric backfrop

 
Features At A Glance

  • Large impacting graphics
  • One-piece seamless print
  • Easy to carry and assemble
  • Twinbase XL

FLEX-display 4.5m x 2m fabric backdrop

450cm wide displays are made by using three Twinbase XLs to support one very wide graphic.  The fabric graphic is not in sections, printed in one piece and therefore totally seamless 9m2 of print.

This display has two flexible joints which allow the display to be used straight or angled as you wish.  It helps too when folding the display away for transportation and storage.  In this case, the graphic is folded in a Z-shape down to 1.5m before rolling away.

These displays are still lightweight and make an ideal portable backdrop for any situation.  They are often used for showrooms, events or as an exhibition stand back wall.

Weight And Portability

The FLEX-display Backdrop 450 system is very lightweight, especially when compared to a pop-up display for example. Using dye sublimation printed polyester fabric supported by aluminium hardware the 4.5m x 2m backdrop seen above weighs in at approximately 11kgs including carry cases.

The whole system fits neatly into two carry cases measuring 160cm in length by approx 10cm diameter and one measuring 135cm in length of the same style and diameter.

Flexibility

As the graphic is independent of the vertical poles and bases, it is simple to change.

The system can also be made double sided too but only if straight (not angled) by using a different clip set and adding a second fabric graphic with rails to the rear of the display.

As we are using 3 x Twinbase XLs with this display, it is easy to use them independently by just having smaller graphics with rails to create to separate banner stands.

Assembly

Although this stand is very large, assembly is still very straight forward but requires 2 people to connect the graphic ideally.

The display comprises bases, poles, clip set and fabric graphic.

Like all of our displays, the components are modular and designed for easy push fit assembly. Building this stand hardware is just as easy as building up one of our smaller displays as it works in the same way.

Images Of FLEX-display Backdrop 450 Systems

Flex Display Backdrop 450

4.5M Banner Backdrop 1

4.5M Banner Backdrop 2

 

Tall FLEX-display Backdrop 450

4.5M Tall Banner Backdrop

Angled FLEX-display Backdrop 450

Angled Banner Backdrop 450

3m x 2m

3M Backdrop Banner


Angled or Straight Backdrops
With one seamless printed graphic

Features At A Glance

  • Seamless, one-piece graphics
  • Straight or angled
  • Remain lightweight and portable
  • Twinbase XL

Lightweight & portable FLEX-display 3m x 2m fabric backdrop

300cm wide displays are made by using two Twinbase XLs to support one very wide graphic. Fabric graphic is not in sections, printed in one piece and therefore totally seamless.

This display has a flexible central joint which allows the display to be used straight or angled as you wish. It helps too when folding the display away for transportation and storage.

These displays are still lightweight and make an ideal portable backdrop for any situation. They are often used for showrooms, events or as an exhibition stand back wall.

Weight And Portability

The FLEX-display Backdrop 300 system is very lightweight, especially when compared to a pop-up display for example.  Using printed polyester fabric supported by aluminium hardware the 3m x 2m backdrop seen above weighs in at approximately 8kgs including carry cases.

The whole system fits neatly into two carry cases measuring 160cm in length by approx 10cm diameter.

Flexibility

As the graphic is independent of the vertical poles and bases, it is simple to change.

The system can also be made double sided too but only if straight (not angled) by using a different clip set and adding a second fabric graphic with rails to the rear of the display.

As we are using 2 x Twinbase XLs with this display, it is easy to use them independently by just having smaller graphics with rails to create to separate banner stands.

Assembly

The stand has been designed with the user in mind and assembly is very simple.

The display comprises bases, poles, clip set and fabric graphic.

See the assembly video below to see how easy it is to put this display together.


3M Banner Backdrop 3

2m x 2m

2M Backdrop Banner


Lightweight, portable fabric backdrop
Slightly larger and easily assembled

 
Features At A Glance

  • Compact approx 5kgs
  • Impacting fabric graphics
  • Single or double sided

Lightweight & portable FLEX-display 2m x 2m fabric backdrop

When banners get beyond 1.5m in width, more than one base is required to support the banner and maintain stability.  Here we use 2 of our Crossbases and vertical poles to support a 2m x 2m fabric graphic (in one piece, not sectional).

This size display is perfect to use with trestle table and printed tablecloth (as shown right) to create and almost instant, large, inviting display area.

Weight And Portability

These displays are very lightweight.  The banners are lightweight as they are printed onto polyester fabric and supported by aluminium hardware.  The 2m x 2m backdrop seen above weighs in at approximately 5kgs including carry case.

As we have snaplock bars available in 2m lengths, the fabric graphic is fitted with these top and bottom allowing it to be rolled away just as we would with a much smaller banner stand.  So the whole system fits neatly into one carry case measuring 208cm in length by approx 10cm diameter.

If needed, we can fit the graphic with folding rails so that the graphic can fold in half when even greater portability is required.  In this way, the system fits into 2 smaller cases of 108cm in length.

Flexibility

As the graphic is independent of the vertical poles and bases, it is simple to change.

The system can also be made double sided by using a different clip set and adding a second fabric graphic with rails to the rear of the display.

As we are using 2 x Crossbases with this display, it is easy to use them independently by just having smaller graphics with rails to create to separate banner stands.

Assembly

The stand has been designed with the user in mind and assembly is very simple.

The display comprises bases, poles, clip set and fabric graphic.

The image below shows the hardware of the display assembled with the rolled graphic ready to be attached.  It really is a 2 minute job.

 

Banner Stand Poles